|2 x 3||SKU 25491||$179|
|5 x 8||SKU 25492||$979|
|7.10 x 10.10||SKU 25493||$2,079|
|9 x 13||SKU 25494||$3,259|
The loom is a structure that allows area rugs to be woven by holding the warp strands taut. This time honored, hand crafted product has a natural beauty with inherent variations, irregularities, and inconsistencies. The loops may be inconsistent and vary in thickness and height.
1. Use the handheld attachment to vacuum your rug. High powered vacuums can pull threads out of the back of tugs and cause sprouts.
2. Turn the beater bar off on your vacuum, or if it can not be turned off have it on the highest setting. Beater bar can pull fibers from the face of the rug or they can cause the face of your rug to fuzz
3. Carefully place your vacuum on the edge of the rug. The serging on the edges of rugs are very sensitive. Running the vacuum over the edges can cause the serging to deteriorate and fibers can come loose around the edges.
4. Use the handheld attachment to clean edges.
5. Brooms and sweepers are a great, gentle way to clean your rug. Canister vacuums without beater bars are the most effective.
No two rugs are the same. Slight color variations are common for handmade rugs, as dye lots may change over a period of time.
All wool rugs will shed. Shedding will subside over time, depending on traffic and wear. It typically takes 20-25 vacuums, at a minimum, to curtail shedding. Some will shed for the lifetime of the rug.
If your rug has been rolled or folded for shipping, it may include creases. Creases should disappear within a week or two when the rug is laid out flat. Reverse rolling the rug overnight will help.
Loose fibers, or sprouts, are a normal part of the break-in process of handmade rugs. To remove sprouts, use a small pair of scissors to snip them off even with the pile. Do not pull the fiber out, as this can cause a deterioration of the backing.
If exposed to direct sunlight, rug colors typically fade over time, even if they are fade resistant.
As a general rule, rugs of all materials and constructions should be rotated every 3-6 months to balance color and evenly distribute wear.